Category Archives: Mushroom paper

Sole mates


Mushroom paper shoes
Mushroom paper shoes

My dyepots have been cool for several months now—fall is the time for collecting dye mushrooms, and it was a fairly good season, all in all—so here’s a photo of something else I made in the summer. These were in response to a call for entries for an exhibit, “Under My Feet,” put on by my fibre mentor and textile artist extraordinaire, Yvonne Stowell, in her lovely space, FibreWorks Gallery, in Madeira Park.

Papermaking takes second place to dyeing and spinning, but occasionally I get the urge to mix up a vat of mushroom pulp, pull out the molds and deckles, and make a right good mucky mess. Yvonne’s call for entry came at a time when I decided I needed some slip-on shoes specifically for my studio (the bright orange Crocs just don’t do it for me), so I used a pair of almost-falling-apart house slippers as molds.

I first made the soles (using pulp made from red-belted conk, or Fomitopsis pinicola), cutting several layers of paper around an outline of the slipper soles and pressing them together—”laminating” sounds more sophisticated, doesn’t it? Then I draped more cut-to-shape pieces over the tops, again pressing several layers together. I hadn’t planned how to secure the various parts to the soles, but my hands naturally went into piecrust mode, and that seemed to work, so for continuity, I continued that pattern around the backs of the soles. The shoes needed some embellishment, and I had lots of leftover Dyer’s Polypore (Phaeolus schweinitzii) pulp on hand, and I used that to make some brown diagonal bands. Phaeolus pulp is quite crumbly, and I had to be careful to keep it from falling apart.

I covered everything loosely with plastic wrap, to keep the shoes from warping, but after a few weeks I noticed bits of white mold were taking root. I removed the slippers and stuffed the openings with crumpled newspaper, placed them on a mesh screen to encourage the bottoms to dry, and left them under a very loose tent of plastic.  When everything had dried, the dark brown bands were still crumbly, so I gave everything a waterproofing coating.

Mushroom paper being what it is, I didn’t expect to come up with anything dainty or delicate; “robust” is probably a better word to describe these (although they weigh almost nothing). However, they’ll end up being for display only—these thick soles have absolutely no capacity to bend, and stomping around flat-footed is a bit ungainly!

Don’t expect me to create a line of fashionable paper shoes—not in the immediate future, anyway.

This is why I freeze my turkeytails

ImageIf you bring some fresh turkeytails (Trametes versicolor) home from the forest, chances are those turkeytails will be home to some tiny little mites who like to eat turkeytails. If you plan on using those turkeytails within a few weeks, it’s no problem, but if you should leave those turkeytails in a paper bag on a hidden shelf in your basement for a year or three, those little mites will have had a feast beyond their greatest expectations.

And that’s exactly what happened here. While sorting through some papermaking supplies on a basement shelf, I came upon a little bag of powdery debris topped by a few holey bits of barely recognizable turkeytails (see the two specimens on the left). The two on the right just came in from the forest and are destined for the next boil-up; the rest of my huge stash of turkeytails are sitting in the freezer until I’m ready to use them.

I freeze mushroom paper for the same reason, following which I coat it with some kind of sealer. Same goes for jewelry mushrooms, too.

Fresh turkeytails

The turkeytails (Trametes versicolor) are strutting their stuff, as is their wont at this time of year. They grow in abundance on dead or dying alder and have no problem establishing a presence in our forest. (I’ve heard them referred to as the “crabgrass of the woods” for just that reason.) They thrive on a stump or log for a year and may appear in the same place the next year, but in smaller numbers. But by that time they’ll have moved on to another host.

I’m picking these now, setting aside those of jewelry quality and cooking the rest, a handful at a time, for a health-giving tea, after which they go into a holding bin until such time as I’m ready to use them for paper.

The forest is indeed generous.Image

Getting into papermaking mode

Fomitopsis pinicola

Conk nurse tree

My dyepots aren’t yet exhausted, but they’re nearing the end, so it’s time to get into papermaking mindset. I spent a pleasant couple of hours in the forest this afternoon and came home with a whole bag of little red-belted conks (Fomitopsis pinicola). This is a ubiquitous shelf fungus that can grow to huge proportions—more than two feet wide, at times. You might well ask, Why does she not leave the small ones until they grow larger, thus resulting in more raw material?

I’ve learned, dear reader, from experience. As conks grow in size, they grow harder and tougher. I’ve had some soaking for years, and they’re just as hard on the scissors (and hands) now as they were when I first picked them. Even these smallish ones will have to soak for a month or two, but they’re almost pliable at this size and will be fairly easy to handle once I’m ready for them.

And with “nurse trees” like this one, I’m guaranteed a never-ending supply.

Hydnellum necklace, mushroom earrings

Hydnellum necklace

I finished these pieces just in time for a jewelry exchange among members of our spinners’ and weavers’ guild. To make the necklace, I twisted three “ropes” of a chunky thick-and-thin handspun made of wool I’d dyed with a Hydnellum (H. aurantiacum, I think, but I need to confirm that when those mushrooms are out again this fall). Then I let three of these ropes twist back on themselves, resulting in a thick cable. I bound each end of the ropes with thread, then attached a clasp and mushroom paper beads for a closure. The earrings are also made of mushroom paper beads.

I’m particularly pleased that this soft green is the perfect colour for the person whose name I drew, and I hope she’s pleased with it, too.

My hat found a new home

My hat went to a good home

I carried this hat on my head for the duration of several flights on the journey to Sweden, as I didn’t want it to undergo the rigours of baggage handling.

This gentleman, also an attendee at the Fungi & Fibre Symposium, won the hat in a raffle draw, and I’m pleased to see that it fits him, more or less.

This hat’s going to Sweden!

Mushroom hat

This hat dried just in time for me to take it along with me to the International Fungi & Fibre Symposium in Gysinge, Sweden. Its base is made of conk (Fomitopsis pinicola), with turkeytails (Trametes versicolor) and dyer’s polypore (Phaeolus schweinitzii) for the added colour and texture.

I hesitated to pack this in my suitcase, fearing it might get crushed or lost, so the safest way to transport it was on my head. It’s surprisingly sturdy and attracted a fair bit of attention, but I do need to find a better mold – I molded this over a bowl, and it ended up being a bit too wide and a bit too shallow. I made some “hat bands” of felted wool, which helped with the fit, but I still have to screw it on my head until it fits securely!

Sweden in another week!

Mushroom hat finds a new home

David's mushroom hatMy mushroom paper hat had been sitting on the coffee table, waiting for a new home. And guess what? It’s now gone home with David Arora!

David was our guest speaker at the First Annual Sunshine Coast Mushroom Fest held here in Pender Harbour in October, and he was our guest here during that time.

Photos of lobsters
Photos of lobsters

He stayed on until we had a few days of sunshine (this is the Sunshine Coast, after all!), to take advantage of the light so he could get some mushroom photos. Here he’s found one of our lobster patches.

Mushroom Bowler

Mushroom bowlerHere’s a variation on the mushroom bowl: a bowler hat! It’s still sitting on the metal bowl I used as a form, but it should be ready to pop away in a few days. Given the shrinkage rate of this paper, I doubt the hat will fit on my own head, but maybe someone will find it useful.

More mushroom bowls

Insides of two mushroom bowls
Insides of two mushroom bowls
Outsides of same bowls
Outsides of same bowls

Here are two views of the same bowls. I used a turkey baster to place the different colours on the screens for the paper that was to become the  insides of the bowls, and for the outside textures, just pressed  damp mushroom pulp on the core of each bowl (which was made of  conk pulp). These were molded over glass bowls, on which I’d sprayed some Pam to act as a release. After sitting covered overnight, I put them outside in a shaded area until I could see the pulp wanting to shrink away from the bowl. With a little “nudge” from a knife blade, they popped right off. To keep them from warping, though, I left them sitting on the glass bowls until they were thoroughly dry.